Futaba R606FS - 6ch Rx 2.4GHz FASST
Developed alongside the 6EXP transmitter on 2.4GHz, the R606FS 6 channel receiver utilises Futaba Advanced Spread Spectrum Technology (FASST) to give the ultimate in 2.4GHz performance. Using Futaba’s Diversity Antenna System gives superior reception, yet even with all this technology the receiver weighs a mere 9.8g!
Price: £57.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R607FS - 7ch Rx 2.4GHz FASST
Futaba 7ch 2.4GHz receiver
Price: £62.98
( Including VAT at 17.5% )
|  |
| |
|
Futaba R122JE - 2CH 27Mhz AM
Low cost 27 Mhz AM two-channel receiver that incorporates single chip design for improved reliability and a new moulded case with crystal protection.
Ideal for use in model cars, boats and simple aircraft.
Specifications:
Channels = 2
Current Drain = 32mA
Size = 46 x 31.5 x 25mm
Weight = 16.8g
Price: £15.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R114H - 4CH 27Mhz AM
Small, low cost four channel 27MHz receiver that’s ideal for use with many 27Mhz Futaba systems. Also ideal as a replacement receiver for the old ‘M’ series - allowing the system to be used with the current servo range or with older servos when using the appropriate conversion leads.
Specifications:
Channels = 4
Current Drain = 8mA
Size = 47.4 x 33 x 19.8mm
Weight = 27.5g
Price: £29.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R156F - 6CH 35Mhz FM (micro)
Big brother of the very popular R114F 4-channel receiver, this new 6-channel receiver is only fractionally larger, and weighs a mere 13 grams. Offering a range increase of 10% over the R114F, this receiver is ideal for a wide range of models where a light and compact receiver is required, park flyers, gliders, foam models etc.
Specifications:
Channels = 6
Size = 21.4 x 33.3 x 13.1mm
Weight = 13g
Price: £26.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R146iP - 6CH 35Mhz FM PCM (mini)
Eliminate troublesome interference problems from high power and brushless electric motors with this new mini PCM 1024 receiver. Compatible with all current and most older Futaba PCM sets, this is a full 6-channel receiver, so is suitable for many models requiring wing mixes.
Specifications:
Channels = 6
Size = 28.7 x 42.7 x 16mm
Weight = 18g
Price: £44.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R137F - 7CH 35Mhz FM
Replacing the popular and reliable R136F receiver was always going to be difficult, but Futaba have now produced the definitive standard receiver, the new R137F 7-channel receiver.
The same size as the old 6-channel receiver, yet offering an extra channel at a lower price. With the legendary Futaba reliability, this will be the receiver all others are compared against.
Specifications:
Channels = 7
Size = 50.3 x 33.4 x 18.1mm
Weight = 28g
Price: £29.99
( Including VAT at 17.5% )
|  |
| |
|
Futaba R168DF - 8CH 35Mhz FM (dual conversion)
Futaba’s new standard Dual Conversion Rx. Perfect for all sport aircraft and helicopter applications due to its dual gate Mosfet technology with excellent overload characteristics.
Specifications:
Channels = 8
Current Drain = 11mA
Size = 63.5 x 35 x 21mm
Weight = 33g
Price: £43.99
( Including VAT at 17.5% )
|  |
| |
