UF-COMBO5 Ultrafly Apollo Brushless 12 ESC (with Programming Card)
Ultrafly Apollo Brushless 12 ESC (with Programming Card)
ESC Features:
-Apollo Brushless 12A continuous (16A surge) ESC.
-Dual BEC design provides 2.0A stable continuous current.
-Runs in forward or reverse. (switch any two wires to reverse).
-High rate (12kHz) switching (PWM).
-Handles 5-8 cells with five micro servos.
-Handles up to 10 cells with three micro servos.
-Handles up to 12 cells with two micro servos (25V max input). Supports up to 4 micro servos & Gyro on 3S LiPo.
-BEC function till 14V.
-Programming card accessible
-Extremely low impedence: 0.0086 ohm
-High temp protection circuit.
-3.5mm female brass bullet connectors on 20 gauge wire.
-Micro Red two pin perpendicular connectors on 20 gauge wire.
-Universal Rx male connector on 22 gauge wire.
User programmable features:
-Motor timing (Auto/Low/Standard/Advanced)
-Brake Type (ON/OFF)
-Voltage cut-off (LiPo auto/5V)
-Low torque soft start feature.
-Safe "power on" arming program prevent accidental starts.
Programming card included
Programming features include:
-Motor Timing (Auto/Low/Standard/Advanced)
-Voltage cut-off (LiPo auto/5V)
-Brake Type (ON/OFF)
Price: £35.99
( Including VAT at 17.5% )
|  |
| |
|
UF-COMBO6 Ultrafly Apollo Brushless 25 ESC (with Programming Card)
Ultrafly Apollo Brushless 25 ESC (with Programming Card)
ESC Features:
-Apollo Brushless 25A continuous (32A surge) ESC.
-Dual BEC design provides 2.0A stable continuous current.
-Runs in forward or reverse. (switch any two wires to reverse).
-High rate (12kHz) switching (PWM).
-Handles 5-8 cells with five micro servos.
-Handles up to 10 cells with three micro servos.
-Handles up to 12 cells with two micro servos (25V max input). Supports up to 4 micro servos & Gyro on 3S LiPo.
-BEC function till 14V.
-Programming card accessible
-Extremely low impedence: 0.0086 ohm
-High temp protection circuit.
-3.5mm female brass bullet connectors on 16 gauge wire.
-Red two pin perpendicular connectors on 16 gauge wire.
-Universal Rx male connector on 22 gauge wire.
Programming card included
Programming features include:
-Motor Timing (Auto/Low/Standard/Advanced)
-Voltage cut-off (LiPo auto/5V)
-Brake Type (ON/OFF)
Price: £42.99
( Including VAT at 17.5% )
|  |
| |
|
UF-COMBO7 Ultrafly Apollo Brushless 35 ESC (with Programming Card)
Ultrafly Apollo Brushless 35 ESC (with Programming Card)
ESC Features:
-Apollo Brushless 35A continuous (50A surge) ESC.
-Dual BEC design provides 2.0A stable continuous current.
-Runs in forward or reverse. (switch any two wires to reverse).
-High rate (12kHz) switching (PWM).
-Handles 5-8 cells with five micro servos.
-Handles up to 10 cells with three micro servos.
-Handles up to 12 cells with two micro servos (25V max input). Supports up to 4 micro servos & Gyro on 3S LiPo.
-BEC function till 14V.
-Programming card accessible
-Extremely low impedence: 0.0086 ohm
-High temp protection circuit.
-3.5mm female brass bullet connectors on 16 gauge wire.
-Red two pin perpendicular connectors on 16 gauge wire.
-Universal Rx male connector on 22 gauge wire.
Programming card included
Programming features include:
-Motor Timing (Auto/Low/Standard/Advanced)
-Voltage cut-off (LiPo auto/5V)
-Brake Type (ON/OFF)
Price: £59.98
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-7A-AIR BEC Brushless Speed Controller
Current constant = 7amp
Current peak = 9amp
Weight = 12g
BEC = Yes
Size = 22 x 21 x 4mm
Battery = 5 - 10 cell NiCAD, 2 - 3 cell LiPO
Fully programmable = yes
Type = aircraft
Price: £22.00
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-12A-AIR BEC Brushless Speed Controller
Current constant = 12amp
Current peak = 16amp
Weight = 22g
BEC = Yes
Size = 34 x 24 x 7mm
Battery = 5 - 10 cell NiCAD, 2 - 3 LiPO
Fully programmable = yes
Type = aircraft
Price: £25.99
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-20A-AIR BEC Brushless Speed Controller
Current constant = 20amp
Current peak = 24amp
Weight = 22g
BEC = yes
Size = 34 x 24 x 7mm
Battery = 5 - 10 cell NiCAD, 2 - 3 cell LiPO
Fully programmable = yes
Type = aircraft
Price: £28.99
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-30A-AIR BEC Brushless Speed Controller
Current constant = 30amp
Current peak = 35amp
Weight = 28g
BEC = yes
Size = 42 x 24 x 7mm
Battery = 5 - 10 cell NiCAD, 2 - 3 LiPO
Fully programmable = yes
Type = aircraft
Price: £37.99
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-25A-HELI BEC Brushless Speed Controller
Current constant = 20amp
Current peak = 24amp
Weight = 25g
BEC = yes
Size = 34 x 24 x 7mm
Battery = 5 - 10 cell NiCAD, 2 - 3 cell LiPO
Fully programmable = yes
Type = helicopter
Price: £32.99
( Including VAT at 17.5% )
|  |
| |
|
E-Pro SP-30A-HELI BEC Brushless Speed Controller
Current constant = 30amp
Current peak = 35amp
Weight = 28g
BEC = yes
Size = 42 x 24 x 7mm
Battery = 5 - 10 cell NiCAD, 2 - 3 LiPO
Fully programmable = yes
Type = helicopter
Price: £38.99
( Including VAT at 17.5% )
|  |
| |
|
JP Brushless Speed Controller (SF 22AMP-2412)
S.F. sensorless, brushless speed controller.
Features:
Amp rating = up to 22 amp continuous (32 amp surge)
Cells = up to 10 cells with 4 micro servos (12 cells with 2 servos)
User programmable features = low voltage cutoff, current protection
Features = brake, on or off
Lithium = 2 - 4 cells
Price: £29.99
( Including VAT at 17.5% )
|  |
| |
|
Tornado 20 Amp Brushless Speed Controller
Specifications:
Size = 36 x 24 x 9mm
Unit weight = 14g
Use = brushless motors up to 20amp
Configuration = NiCAD/NiMH 6 - 12 cells, LiPO 2 - 3 cells
Charge = 25amp in bursts
Discharge = 20amp constant
Price: £29.99
( Including VAT at 17.5% )
|  |
| |
|
Tornado 40 Amp Brushless Speed Controller
Specifications:
Use = brushless motors up to 40amp
Configuration = NiCAD/NiMH 6 - 12 cells, LiPO 2 - 3 cells
Charge = 45amp in bursts
Discharge = 40amp constant
Price: £39.99
( Including VAT at 17.5% )
|  |
| |
|
Phoenix-25 Brushless Motor Control
The Phoenix-25 is the workhorse of many a modelers fleet, and a favorite choice of 3D foamy pilots. Still small and light enough for indoor and parkflyers, but capable enough for high performance wings with Speed 400 size brushless motors. Your Mega 16/15 series, Feigao and Himaxx 28mm motors, small and medium sized AXI motors, and Hacker B40 motors will all perform at their peak with the Phoenix-25.
Cells w/BEC 5-10
Cells w/o BEC 5-16
Continuous 25 amps
Switching Rate 11,000 hz
Resistance 0.0065 ohms
Brake Yes
Reversible Yes - change any two wires
Low Voltage
Cut-off Programmable
Size 1.08 x 0.91 x 0.16"
Weight
(w/wires) 0.6 oz (17g)
Connector Type Universal
Price: £49.95
( Including VAT at 17.5% )
|  |
| |
|
Phoenix-45 Brushless Motor Control
With a surge current of 60 amps, the Phoenix-45 is well suited for warmliners, small hotliners, and even some 40 size glow conversion projects. Matched up with Hacker B50 and C50 motors, medium and large AXI motors, or 36mm Feigao motors, the Phoenix-45 puts a lot of power at your fingertips, and all in a very light and compact package.
With the same programmable features of it's smaller cousins, the Phoenix-45 can be set for helicopter installations (including those with collective pitch) or airplanes. Additionally, for competition flyers the Phoenix-45 features an adjustable switching rate for optimum efficiency.
Cells w/BEC 5-12
Cells w/o BEC 5-16
Continuous 45 amps
Switching Rate Programmable
(11, 22, or 41 khz)
Resistance 0.0026 ohms
Brake Yes
Reversible Yes - change any two wires
Low Voltage
Cut-off Programmable
Size 0.95 x 1.72 x 0.4"
Weight
(w/wires) 1 oz (30g)
Connector Type Universal
Price: £69.95
( Including VAT at 17.5% )
|  |
| |
|
Phoenix-60 Brushless Motor Control
With the ability to handle up to 20 cells, the Phoenix-60 has become a favorite among high performance sailplane, large helicopter, and large glowplane conversion pilots alike. The Phoenix-60 is the controller of choice for Logo 10, and ECO 16 pilots around the world. Large scale airplane pilots love the features and versatility, and especially the smooth throttle response and start-up found on all Phoenix controllers.
With the now familiar programming options in the Phoenix line, the Phoenix-60 can be set for helicopter installations (including those with collective pitch) or airplanes. Competition flyers will benefit from the Phoenix-60's adjustable switching rate to insure optimum efficiency in their models
Cells w/BEC 5-12
Cells w/o BEC 5-20
Continuous 60 amps
Switching Rate Programmable
(11, 22, or 41 khz)
Resistance 0.0012 ohms
Brake Yes
Reversible Yes - change any two wires
Low Voltage
Cut-off Programmable
Size 1.05 x 2.35 x 0.45"
Weight
(w/wires) 2 oz (58g)
Connector Type Universal
Price: £79.95
( Including VAT at 17.5% )
|  |
| |
|
Phoenix-80 Brushless Motor Control
Never has there been this much reliable power capability in such a compact package. The Phoenix-80's whopping 120 amp surge rating puts it at the head of the field for LMR competition flying, F5D pylon racing, and large helicopters. With a super low 0.0012 ohms of resistance, the Phoenix-80 keeps it's cool under the most demanding conditions.
The Phoenix-80 comes with the full range of Phoenix programming options including adjustable switching rate, programmable brake and several timing modes for the ultimate in competition controllers.
Cells w/BEC 5-12
Cells w/o BEC 5-20
Continuous 80 amps
Switching Rate Programmable
(11, 22, or 41 khz)
Resistance 0.001 ohms
Brake Yes
Reversible Yes - change any two wires
Low Voltage
Cut-off Programmable
Size 1.05 x2.65 x.45"
Weight
(w/wires) 2.1 oz (60g)
Connector Type Universal
Price: £89.95
( Including VAT at 17.5% )
|  |
| |
