HPI Baja 5B buggy with 23cc 2-stroke petrol engine



Baja style roll cage made of high impact nylon	Hardened metal is used throughout the drivetrain	Power comes from the 23cc 2-stroke petrol engine	Double wishbone suspension with aluminium shocks


Dirt Buster tyres with different tread pattern for front and rear			High quality TF-10 FM radio system offers excellent range
	CLICK ON HPI Baja 5B FOR PRICE & AVAILABILITY		HPI BAJA 5B SPARES

	OVERVIEW

	The HPI Baja 5B is a rear wheel drive 1/5th scale off-road buggy that is nearly 32" in length! Its design is revolutionary for large scale RC Cars, following the style of classic Baja buggies with long suspension arms for great ground clearance and large suspension travel. The big size allows the HPI Baja 5B to go where smaller buggies can't and makes the Baja 5B's driving experience as close as you can get to the real thing. The Baja 5B is big, but coming as an "RTR" car and powered by petrol, it can't be easier to get ready for action. Everything is included in the kit - preassembled Baja 5B chassis, prepainted Baja body shell, preinstalled high quality FM radio gear with built in failsafe, 6V receiver pack and charger, preinstalled massive 23cc petrol engine providing plenty of power. All you need to do is fill up with petrol and 2-stroke oil and away you go!

CLICK ON IMAGES TO ENLARGE

Easy off roll cage

Easy off water
resistant radio box

Ventilated dual disk brake

Automatic long life
centrifugal clutch

Rubber gater
protects driveshafts

Suspension adjustable
with shims

Quick access
gearbox protection

Adjustable rear wing

Oversized front
steering hub

Adjustable rear hub

Rear exhaust

Dual rate springs for
optimal damping

Protected upper
shock mounts

Protected lower
shock mounts

Rubber caps for charging
jack and crystal

Rechargeable receiver
pack and FM failsafe

Rubber protected switch

Easy removal of the
radio box with body clips

Strong U-shape
aluminium chassis

Plastic under body
protects the chassis

Large air filter

Convenient engine
stop button

Viscous torque control differential

Adjustable turn buckle
and oversized ball end

SPECIFICATIONS

CHASSIS

Length: 817mm
Height: 255mm
Width: Front 460mm / Rear 480mm
Tyre Track: Front 395mm / Rear 400mm
Wheelbase: 570mm
Ride height: 76mm
Suspension travel: Front 95mm / Rear 100mm
Weight: 9.6kg (21.3lb)
Camber: Adjustable front with shims rear with screw
Front caster: Adjustable with shim 22 / 25.5* / 29 degrees (* stock)
Toe-in: Adjustable front with tie rod rear with shims 2 / 3* / 4 degree each side (* stock)
Aircraft aluminium 6061 T6 monocoque chassis
Double wishbone suspension with adjustable roll center
Twin plate ventilated disk brake
Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio)
Diff: Torque control viscous with 4 pinion gears sealed diff case with silicone oil
Shock absorber: 5 position adjustable dampening and fully adjustable coil over spring
Wheel type: 3 piece with high impact nylon material

ENGINE

RADIO

FM radio system with failsafe system
Steering servo: High torque water resistant 25kg.cm with Speed 0.16sec/60 degree
Throttle servo: High torque water resistant 6kg.cm with Speed 0.16sec/60 degree
Receiver battery: 6 volt rechargeable NiCAD battery